lemon-mirror:
Home >> Jeep >> 2014 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Removal >> Removal

Heater, Engine Block: Removal: Removal

Fig 1: Air Cleaner Body, Fresh Air Makeup Hose, Electrical Connector, Clamp, Bolts & Retainers
GC0154000Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the temperature sensor electrical connector (3).
  4. Remove the air intake support bolts (5).
  5. Remove the air breather tube (2) from the air filter housing (1).
  6. Remove the air intake hose at the throttle body (4).
  7. Remove the air filter housing cover.
    Fig 2: Drive Belt Tensioners & Assembly With Drive Belt
    GC0153982Courtesy of CHRYSLER GROUP, LLC
  8. Remove the accessory drive belt (7).
    Fig 3: A/C Compressor & Mounting Bolts
    GC0153970Courtesy of CHRYSLER GROUP, LLC
  9. Disconnect the A/C compressor electrical connector.
  10. Remove the bolts (1) that secure the A/C compressor (2) to the engine. Position the A/C compressor aside.
    Fig 4: Block Heater & Screw
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  11. Detach power cord plug from heater (1).
  12. Remove the screw (2) that secures the heater to the block.
  13. Remove heater assembly.
· About lemon-mirror