lemon-mirror:
Home >> Jeep >> 2016 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

Fig 1: Block Heater & Screw
GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Clean block core hole and heater seat.
  2. Install the engine block heater (1). Tighten the bolt (2) to 12 N.m (9 ft. lbs.).
  3. Connect the power cord plug to the engine block heater (1).
  4. Fill the cooling system. Refer to STANDARD PROCEDURE .
    Fig 2: A/C Compressor & Fasteners
    GC0145963Courtesy of CHRYSLER GROUP, LLC
  5. Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .
· About lemon-mirror