lemon-mirror:
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Air Temperature, Intake >> Installation

Sensor, Air Temperature, Intake: Installation

GC0148204Courtesy of CHRYSLER GROUP, LLC
  1. Inspect and lubricate the IAT/MAP sensor O-ring seal.
  2. Clean the IAT/MAP sensor sealing area.
  3. Install the IAT/MAP sensor (1) and securely tighten the bolt (2).
  4. Connect the IAT/MAP sensor wire harness connector (3).
  5. Connect the negative battery cable.
· About lemon-mirror