lemon-mirror:
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Wheel Alignment >> Technical Specifications >> Set-To Specifications

Set-To Specifications

NOTE:

All specifications are given in degrees.

NOTE:

All wheel alignments are to be set with the vehicle at curb height. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .

NOTE:

With service there is both a set-to and service measurement check specifications. Set-to specifications are the parameters and tolerances used when adjusting alignment is necessary. A measurement specification is for the initial measurement of a vehicle in service. If this vehicle does not pass the measurement specification then the alignment should be adjusted to the set-to specification. Measurement specification is due to variation from measurement tools and setting.

Front Wheel Alignment Specifications
  Tire Size Total Toe(2) Caster - Left Caster - Right Cross Caster(1) Individual Camber Cross Camber
FWD  16 → 19 inch -0.16° +/- 0.13° 5.24° +/- 0.50° 5.24° +/- 0.50° 0.00° +/- 0.50° -0.40° +/- 0.50° 0.00° +/- 0.50°
AWD Base  17 → 19 inch -0.16° +/- 0.13° 4.86° +/- 0.50° 4.86° +/- 0.50° 0.00° +/- 0.50° -0.70° +/- 0.50° 0.00° +/- 0.50°
AWD Pedpro  17 inch -0.16° +/- 0.13° 4.81° +/- 0.50° 4.81° +/- 0.50° 0.00° +/- 0.50° -0.45° +/- 0.50° 0.00° +/- 0.50°
AWD Trailhawk  17 inch -0.16° +/- 0.13° 4.86° +/- 0.50° 4.86° +/- 0.50° 0.00° +/- 0.50° -0.52° +/- 0.50° 0.00° +/- 0.50°
(1) For reference only. These are nonadjustable angles.
(2) TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (?) is Toe-out.
Rear Wheel Alignment Specifications
  Tire Size Individual Toe Total Toe(1) Thrust Individual Camber Cross Camber
FWD  16 → 19 inch 0.10° +/- 0.06° 0.20° +/- 0.13° 0.00° +/- 0.10° -1.10° +/- 0.50° 0.00° +/- 0.50°
AWD Base  17 → 19 inch 0.10° +/- 0.06° 0.20° +/- 0.13° 0.00° +/- 0.10° -1.12° +/- 0.50° 0.00° +/- 0.50°
AWD Pedpro  17 inch 0.10° +/- 0.06° 0.20° +/- 0.13° 0.00° +/- 0.10° -0.91° +/- 0.50° 0.00° +/- 0.50°
AWD Trailhawk  17 inch 0.10° +/- 0.06° 0.20° +/- 0.13° 0.00° +/- 0.10° -0.82° +/- 0.50° 0.00° +/- 0.50°
(1) TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (?) is Toe-out.
· About lemon-mirror