lemon-mirror:
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 2.0L Cooling System >> Engine >> Fan, Cooling >> Removal

Fan, Cooling: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the pressurized coolant bottle. Refer to REMOVAL  .
  3. Remove the hood latch. Refer to LATCH, HOOD, REMOVAL .
  4. Disconnect the upper oxygen sensor wire harness connector.
    GC0186595Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolts (1) and the catalytic converter heat shield (2).
    GC0186440Courtesy of CHRYSLER GROUP, LLC
  6. Remove the turbocharger heat shield nut and stud (1).
    GC0187178Courtesy of CHRYSLER GROUP, LLC
  7. Detach the coolant hose (1) from the upper radiator panel (2).
    GC0187137Courtesy of CHRYSLER GROUP, LLC
  8. Disconnect the cooling fan module wire harness connector.
  9. Remove the wiring harness (1) and retainers from the upper radiator panel (2) and position aside the wire harness.
    GC0186454Courtesy of CHRYSLER GROUP, LLC
  10. Disconnect the ambient air temperature sensor wire harness connector (1).
    GC0186838Courtesy of CHRYSLER GROUP, LLC
  11. Remove the fasteners (1) and the upper radiator panel (2).
    GC0186463Courtesy of CHRYSLER GROUP, LLC
  12. Remove the six bolts (1, 2) and the upper core support (3).
  13. Remove the fasteners and the right and left air deflectors.
  14. Remove the upper radiator hose.
    GC0186682Courtesy of CHRYSLER GROUP, LLC
  15. Remove the cooling fan bolts (1).
  16. Lift up and remove the cooling fan assembly (2) from the top.
· About lemon-mirror