Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Brake Shield | 8 | - | 71 | |
| Hub and Bearing Bolts | 50 Plus 100° | 37 Plus 100° | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Hub Nut | 200 | 148 | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Ball Joint Nut | 30 Plus 95° | 22 Plus 95° | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm Front Horizontal Pivot Bolt | 47 Plus 300° | 35 Plus 300° | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm Rear Vertical Bolt | 37 Plus 106° | 27 Plus 106° | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar to Cradle Front Bolts | 51 | 38 | - | |
| Stabilizer Bar to Cradle Rear Bolts | 59 | 44 | - | |
| Stabilizer Bar Link to Stabilizer Bar Nut | 60 | 44 | - | |
| Stabilizer Bar Link to Strut Nut | 60 | 44 | - | |
| Stabilizer Bar Link to Control Arm Nut | 55 | 41 | - | |
| Strut to Knuckle Lower Retaining Bolt | 105 | 77 | - | |
| Strut Rod Nut | 65 | 48 | - | |
| Suspension Cross-member Mounting Bolts - Above Control Arms | 100 | 74 | - | |
| Tie Rod Adjuster Jam Nut | 80 | 59 | - | |
| Inner Tie Rod End | 80 | 59 | - | |
| Wheel Mounting (Lug) Bolts - Aluminum | 130 | 96 | - |