Power Inverter Module

REMOVAL 

1. Disconnect and isolate the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECT - 3.6L or BATTERY DISCONNECT AND CONNECT - 5.7L .
2. Remove the cargo load floor. Refer to LOAD FLOOR, CARGO, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Power Inverter Module (PIM)

3. Remove the wire harness connector from the Power Inverter Module (PIM).
4. Remove the fasteners securing the PIM and remove the module from the vehicle.

INSTALLATION 

1. Position the PIM onto the load floor.
2. Install and securely tighten the fasteners securing the PIM.
3. Install the PIM wire harness connectors.
4. Install the cargo load floor. Refer to LOAD FLOOR, CARGO, REMOVAL AND INSTALLATION .
5. Connect the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECT - 3.6L or BATTERY DISCONNECT AND CONNECT - 5.7L .