Fan, Cooling: Installation: 3.6L/5.7L/6.4L

Courtesy of CHRYSLER GROUP, LLC

If removed, install the upper shroud cover (1). Apply pressure downward until the cover snaps into place past the clip (2).
Install the cooling fan assembly into the vehicle.
Guide the fan/shroud cover assembly into position between the radiator and upper core support.

Courtesy of CHRYSLER GROUP, LLC
Position the cooling fan assembly onto the mounts (3) located on the radiator.
Lock the fan assembly (1) into place by pressing down firmly on the shroud until the locks (3) engage.
If equipped, install the lower engine cover.
Lower the vehicle.
Connect the electric fan wire harness connector (2).
If removed, install the throttle body assembly. Refer to THROTTLE BODY, INSTALLATION .
Install the air intake assembly.
Connect the negative battery cable.
Start the engine and check fan operation.