Wheel Alignment Front: Toe-In
Toe-in (B-A or angle a+b) is adjusted by turning the tie rod turnbuckles. Toe in on the left front wheel can be reduced by turning the tie rod toward the rear of the car. Toe change is adjusted by turning the tie rod of the right and left wheels simultaneously in the same amount as follows:.
Toe-in
| Total : 0°±0.2° |
| Individual : 0°±0.1° |
CAUTION:
- Toe-in adjustment should be made by turning the right and left tie rods in the same amount.
- When adjusting toe-in, loosen the outer bellows clip to prevent the bellows from being twiste
- After the adjustment, firmly tighten the tie rod end lock nuts and reinstall the bellows clip.
Tightening torque
| Tie rod end lock nuts : |
| 49-54 Nm (5.0-5.5 kgm, 36.2-39.8 lbft) |