lemon-mirror:
Home >> Kia >> 2008 >> Sedona Base >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter >> Removal

Starting System: Starter: Removal

  1. Disconnect the battery negative cable.
  2. Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D) from the S terminal (E).
    Fig 1: Identifying Starter Cable, Terminal And Solenoid
    G04804023Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the 2 bolts holding the starter, then remove the starter.
  4. Installation is the reverse of removal.
  5. Connect the battery negative cable to the battery.
· About lemon-mirror