lemon-mirror:
Home >> Kia >> 2009 >> Borrego Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 4.6L >> Engine Control Module (ECM) >> Repair procedures >> Removal

Repair procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together (Refer to TEACHING PROCEDURES ).
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM connectors (A).
    Fig 1: Identifying ECM Connectors
    G06485519Courtesy of KIA MOTORS AMERICA, INC.
  3. After removing the installation bolts (A), remove the ECM (B) from the bracket.
    Fig 2: Identifying ECM & Bolts
    G06485520Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror