lemon-mirror:
Home >> Kia >> 2009 >> Borrego Limited, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module (SRSCM) >> B1739 P-SIS Front-Driver Defect >> Component Inspection

Component Inspection

  1. Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
  2. Ignition "OFF".
  3. Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
  4. Disconnect Pressure-Side Impact connector.
  5. Substitute the Pressure-Side Impact and check for proper operation.
  6. Is DTC present problem?

    YES 

    • Substitute a known-good SRSCM, and check for proper operation.

      If the problem is corrected, replace SRSCM and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    • Substitute the SRSCM main harness and check for proper operation.

      If the problem is corrected, replace SRSCM main harness and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NOTE: If you strike or spin the SRSCM at the IG "ON" state, the seat-belt pretensioner, curtain-airbag or side-airbag could be deployed and bring on danger. Handle it with care.

    NO 

    • Substitute a known-good Pressure-Side Impact, and check for proper operation.

      If the problem is corrected, replace Pressure-Side Impact and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

· About lemon-mirror