lemon-mirror:
Home >> Kia >> 2009 >> Borrego Limited, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module (SRSCM) >> SRS Control Module (SRSCM) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console. (Refer to CONSOLE )
  5. Disconnect the SRSCM harness connector from the SRSCM.
    Fig 1: Identifying SRSCM Harness Connector
    G06368107Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the SRSCM mounting bolts (4EA) from the SRSCM, then remove the SRSCM.
    CAUTION: You must remove or install SRSCM at the ignition switch OFF because SRSCM has overturn sensing function. SAB, CAB, BPT may be deployed if you shake SRSCM at the direction of up and down or right and left at the ignition switch ON.
· About lemon-mirror