Repair Procedures: Inspection

Disconnect the negative (-) battery terminal.
Remove the junction box.
Check for continuity between the terminals.
There should be continuity between the No. 1 in the I/P-G and No. 12 terminal in the I/P-A when power and ground are connected to the No. 1 terminal in the I/P-G and No. 2 terminal in the I/P-A.
There should be no continuity between the No. 1 terminal in the I/P-G and No. 12 terminal in the I/P-A when power is disconnected.

Fig 1: Identifying Junction Box Terminals (1 Of 2)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Identifying Junction Box Terminals (2 Of 2)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Terminals Continuity Chart

Courtesy of KIA MOTORS AMERICA, INC.