lemon-mirror:
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module >> SRS Control Module (SRSCM) >> Description & Operation >> Description >> Hi-Scan Check

Hi-Scan Check

  1. Turn the ignition switch off.
  2. Connect the Hi-Scan Pro connector to the data link connector located under the crash pad.
    Fig 1: Connecting Hi-Scan Pro Connector To Data Link Connector
    G06385135Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn the ignition switch on and power on the Hi-Scan Pro.
  4. Read DTCs.
  5. Find and repair the trouble, and clear the DTCs using Hi-Scan Pro.
  6. Disconnect the Hi-Scan Pro.
  7. Confirm proper system operation:
    1. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then to off.
· About lemon-mirror