lemon-mirror:
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module >> Side Impact Sensor (SIS) >> Repair Procedure >> Removal >> Rear Side Impact Sensor

Rear Side Impact Sensor

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the rear seat. (Refer to REAR SEAT )
  3. Remove the Luggage side trim. (Refer to LUGGAGE SIDE TRIM REPLACEMENT )
  4. Disconnect the side impact sensor connector.
  5. Loosen the side impact sensor mounting bolt and remove the side impact sensor.
    Fig 1: Identifying Side Impact Sensor & Mounting Bolt
    G06385144Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror