lemon-mirror:
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System >> Back-up Lamp Switch >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the back up lamp switch connector.
    Fig 1: Identifying Back Up Lamp Switch Connector
    G06831923Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the back up lamp switch.
  3. Replace a new one and install the back up lamp switch, then connect the connector.

    Tightening torque : 

    30~35 Nm (3.0~3.5 kgf.m, 21.7~25.3 lb-ft)

· About lemon-mirror