lemon-mirror:
Home >> Kia >> 2011 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the surge tank.
Fig 1: Manifold Absolute Pressure Sensor Connector & Bolt
G07395640Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror