lemon-mirror:
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM " in EM group).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
    Fig 1: Identifying ETC Module Connector, Coolant Hoses And Installation Bolts
    G07415497Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror