lemon-mirror:
Home >> Kia >> 2011 >> Soul Base >> Repair and Diagnosis >> Electrical >> Gauges >> Interior >> Crash Pad >> Repair Procedures >> Replacement >> Audio Assembly Replacement

Audio Assembly Replacement

  1. Remove the center fascia panel.
  2. After loosening the heater control unit mounting screws, remove the heat control unit (A).
    Fig 1: Identifying Heater Control Unit & Mounting Screws
    G06525147Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the heat control unit connectors (A).
    Fig 2: Identifying Heater Control Unit Connectors
    G06525148Courtesy of KIA MOTORS AMERICA, INC.
  4. After loosening the audio assembly mounting screws, then remove the audio assembly (A).
    Fig 3: Identifying Audio Assembly & Mounting Screws
    G06525149Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the audio connectors (A).
    Fig 4: Identifying Audio Connectors
    G06525150Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
· About lemon-mirror