lemon-mirror:
Home >> Kia >> 2012 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal >> [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Camshaft Position Sensor Component Location, Connector And Mounting Bolts (Bank 1/Intake)
G08321406Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror