lemon-mirror:
Home >> Kia >> 2012 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.5L >> Intake Air Temperature Sensor (IATS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the surge tank.
    Fig 1: Manifold Absolute Pressure Sensor Component Location, Connector And Installation Bolts
    G07419507Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror