lemon-mirror:
Home >> Kia >> 2013 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.5L >> VCM Position Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM " ).
  3. Remove the installation screws (A), and then remove the VCM position sensor.
    Fig 1: Identifying Installation Screws
    G07419560Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror