lemon-mirror:
Home >> Kia >> 2014 >> Cadenza Limited >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Removal >> Driver Power Window Switch

Driver Power Window Switch

  1. Disconnect the negative(-) battery terminal.
  2. Remove the front door trim panel.

    (Refer to "FRONT DOOR ")

  3. Disconnect the power window switch module connector (A) from the wiring harness.
    Fig 1: Identifying Power Window Switch Module Connector From Wiring Harness
    G09752850Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power window switch module (A) from the door trim after loosening the mounting screws (13EA).
    Fig 2: Identifying Power Window Switch Module From Door Trim
    G09752851Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the module (A) from the sub box assembly after loosening the mounting screw (3EA).
    Fig 3: Identifying Module From Sub Box Assembly
    G09752852Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Be careful not to damage door trim panel and door module mounting hooks.
· About lemon-mirror