lemon-mirror:
Home >> Kia >> 2014 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly. Refer to INTAKE AND EXHAUST SYSTEM .
  3. Disconnect the crankshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
Fig 1: Crankshaft Position Sensor Connector & Bolt
G07395647Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror