lemon-mirror:
Home >> Kia >> 2015 >> Cadenza Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump Control Module (FPCM) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Remove the fuel pump control module mounting bolts (A).
    Fig 1: Identifying Fuel Pump Control Module Mounting Bolts
    G09751400Courtesy of KIA
  4. Disconnect the fuel pump control module connector (A), and then remove the module (B) from the vehicle.
    Fig 2: Identifying Module And Fuel Pump Control Module Connector
    G09751401Courtesy of KIA
· About lemon-mirror