lemon-mirror:
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in the figure after removing the installation bolt (B).
    Fig 1: Removing Accelerator Pedal
    G10717056Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror