lemon-mirror:
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the air cleaner assembly.
    Fig 1: Identifying Barometric Pressure Sensor Connector And Mounting Bolt
    G10717002Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror