lemon-mirror:
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Open the trunk.
  2. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  3. Remove the floor mat in the trunk (Refer to Body - " TRUNK TRIM ").
  4. Remove the Partition board trim (A).
    Fig 1: Identifying Partition Board Trim
    G10717060Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the service cover (A) in the trunk.
    Fig 2: Identifying Trunk Service Cover
    G10717061Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the fuel tank pressure sensor connector (A).
  7. Remove the fuel tank pressure sensor after removing the mounting bolt.
    Fig 3: Identifying Fuel Tank Pressure Sensor Connector
    G10717062Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror