lemon-mirror:
Home >> Kia >> 2015 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

[Valve 1] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the mounting nut (C), and then remove the valve from surge tank.
Fig 1: Variable Intake Solenoid Valve Connector And Mounting Bolt
G10648933Courtesy of KIA MOTORS AMERICA, INC.

[Valve 2] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the mounting nut (C), and then remove the valve from surge tank.
Fig 2: Variable Intake Solenoid Valve Connector And Mounting Nut
G10648934Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror