lemon-mirror:
Home >> Kia >> 2015 >> Sedona EX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G10649083Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (5) and signal terminal (17).

    Specification  : 5.1 ± 0.3 Ω

    Fig 2: Solenoid Valve Connector Power And Signal Terminals
    G10649084Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror