lemon-mirror:
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair procedures >> Removal >> Driver Power Window Switch

Driver Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel.

    (Refer to Body - "FRONT DOOR ")

  3. Disconnect the power window switch module connector (A) from the wiring harness.
    Fig 1: Disconnecting Power Window Switch Module Connector From Wiring Harness
    G11786059Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power window switch module (A) from the door trim after loosening the mounting screws (13EA).
    Fig 2: Removing Power Window Switch Module From Door Trim Mounting Screws
    G11786060Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the module (A) from the sub box assembly after loosening the mounting screw (3EA).
    Fig 3: Removing Module From Sub Box Assembly Mounting Screw
    G11786061Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Be careful not to damage door trim panel and door module mounting hooks.
· About lemon-mirror