lemon-mirror:
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Manifold Absolute Pressure Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then vertically remove the sensor from the surge tank.
Fig 1: Locating Manifold Absolute Pressure Sensor Connector And Installation Bolt
G11784034Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror