Repair Procedures: Removal

Turn the ignition switch OFF, and then remove battery (-) cable.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Disconnect the low pressure fuel quick-connector (A).

Fig 1: Locate Low Pressure Fuel Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 2: Locate PCSV Vapor Hose
Courtesy of KIA MOTORS AMERICA, INC.
Lift the vehicle.
Remove the fuel tank.
(Refter to Fuel Delivery System - "FUEL TANK ")
Remove the vapor tube and low fuel line fixing clip (A) by using a common driver.

Fig 3: Locate Vapor Tube And Low Fuel Line Fixing Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation nuts, and then push the heat protector in the direction of an arrow.

Fig 4: Push Heat Protector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolts (A), and then remove the fuel line fixing clip (B).

Fig 5: Locate Fuel Line Fixing Clip
Courtesy of KIA MOTORS AMERICA, INC.
Release the fuel & brake line protector (A) by disconnecting the fixing clip.

Fig 6: Locate Fuel And Brake Line Protector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel line.

Fig 7: Fuel Delivery System Fuel Line

Courtesy of KIA MOTORS AMERICA, INC.