lemon-mirror:
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Barometric Pressure Sensor (BPS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the mounting bolt (B) and then remove the sensor from the air cleaner assembly.
Fig 1: Remove Sensor From Air Cleaner Assembly
G11872112Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror