lemon-mirror:
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ASSEMBLY ")

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the spring clip (B), and then pull the sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may flow out from the water temperature control assembly when removing the sensor.
    Fig 1: Locate Engine Coolant Temperature Sensor Connector And Spring Clip
    G11872124Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror