Repair Procedure: Removal
WARNING:
When removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, injury may be caused by leakage of high pressure fuel. For this reason, do not attempt any repairing immediately after engine stops.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Release the residual pressure in fuel line.
(Refer to the "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
- Remove the delivery pipe & injector assembly.
(Refer to "DELIVERY PIPE REMOVAL ")
- Remove the connector (A) and the fixing clip (B), and then separate the injector from the delivery pipe.