lemon-mirror:
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve.
    Fig 1: Locating Canister Close Valve Connector And Ventilation Hose
    G11845225Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the fuel tank air filter assembly after removing a bolt (A).
    Fig 2: Removing Fuel Tank Air Filter Assembly Bolt
    G11845226Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the bracket (A) after pulling it.
    Fig 3: Removing Bracket
    G11845227Courtesy of KIA MOTORS AMERICA, INC.
  7. Release the lever (A) by lifting it up.
    Fig 4: Locating Lever
    G11845228Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the image below.
Fig 5: Removing Canister Close Valve From Fuel Tank Air Filter
G11845229Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror