lemon-mirror:
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM ").
  3. Disconnect the connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Locating Connector And Bolt
G11845156Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror