lemon-mirror:
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    Fig 1: Locating Ignition Coil Connector
    G11844911Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin Of Ignition Coil Connector
    G11844912Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the ignition coil (A).
    Fig 3: Removing Ignition Coil
    G11844913Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror