lemon-mirror:
Home >> Kia >> 2017 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
Fig 1: Removing Upper Mounting Cap
G12181532Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Disconnecting Accelerator Position Sensor Connector
G12181533Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror