lemon-mirror:
Home >> Kia >> 2017 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  3. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    Fig 1: Removing Rear Seat LH Air Duct
    G12181537Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the seat cable bracket (A) after loosening the mounting nuts.
    Fig 2: Removing Seat Cable Bracket
    G12181538Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the fuel pump service cover (A) after loosening the mounting screws.
    Fig 3: Removing Fuel Pump Service Cover
    G12181539Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel tank pressure sensor (A) after disconnect the connector (B).
    Fig 4: Removing Fuel Tank Pressure Sensor
    G12181540Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror