lemon-mirror:
Home >> Kia >> 2018 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Switch Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Do not reuse the shear bolts.
  • When installing new shear bolts to the electronic steering column lock, tighten them until the heads are cut off.
  1. Install the key lock cylinder.
  2. Install the key warning switch.
  3. Install the key warning/immobilizer connector.
  4. Connect the ignition switch connector after installing the ignition switch.
  5. Install the multifunction switch.
  6. Install the steering column upper and lower shroud panel.
  7. Install the crash pad lower panel.
  8. Connect the negative (-) battery terminal.
· About lemon-mirror