lemon-mirror:
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Hydraulic System >> Fluid >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the ATF drain plug (A), allow the fluid to drain out and then reinstall the drain plug.

    Tightening torque: 

    33.3 ~ 43.1 N.m (3.4 ~ 4.4 kgf.m, 24.6 ~ 31.8 lb-ft)

    Fig 1: Locating ATF Drain Plug
    G12264435Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: The existing ATF drain plug gasket must be replaced with new one. (Do not reuse it.)
  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY REMOVAL ")

  4. Remove the eyebolt (A).
    Fig 2: Locating Eyebolt
    G12264436Courtesy of KIA MOTORS AMERICA, INC.
  5. Fill the automatic transaxle with about 5.0 liters of ATF SP-IV through the ATF filler hole.
  6. Perform the ATF level check procedure.

    (Refer to Fluid - "INSPECTION ")

· About lemon-mirror