lemon-mirror:
Home >> Kia >> 2018 >> Stinger GT2, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.

    Boost pressure sensor mounting bolt  :

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12803473Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror