lemon-mirror:
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the engine cover.

    (Refer to Engine Mechanical System - " ENGINE COVER  ") 

  3. Remove the surge tank.

    (Refer to Engine Mechanical System - " SURGE TANK  ") 

  4. Disconnect the engine coolant temperature sensor connector (A).
  5. Remove the water temperature sensor (B) from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may leak out of the water temperature control assembly when removing the sensor.
    G12803486Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror