Charging System Test Procedure: Notes

Press ENTER to begin charging system test.

Courtesy of KIA MOTORS AMERICA, INC.
The tester displays the actual voltage of alternator. Press ENTER to continue.

Courtesy of KIA MOTORS AMERICA, INC.
Turn off all electrical load and rev engine for 5 seconds with pressing the accelerator pedal. (Follow the instructions on the screen)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.
The message that engine RPM is detected will be displayed on the screen. Press ENTER to continue.

Courtesy of KIA MOTORS AMERICA, INC.
If the engine RPM is not detected, press ENTER after revving engine.

Courtesy of KIA MOTORS AMERICA, INC.
The tester will conduct charging system test during loads off.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.
Turn on electrical loads (air conditioner, lamps, audio and etc). Press ENTER to continue.

Courtesy of KIA MOTORS AMERICA, INC.
The tester will conduct charging system test during loads on.

Courtesy of KIA MOTORS AMERICA, INC.
Rev engine for 5 seconds with pressing the accelerator pedal. (Follow the instructions on the screen)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.
The message that engine RPM is detected will be displayed on the screen. Press ENTER to continue.

Courtesy of KIA MOTORS AMERICA, INC.
If the engine RPM is not detected, press ENTER after revving engine.

Courtesy of KIA MOTORS AMERICA, INC.
Turn off electrical loads (air conditioner, lamps, audio and etc). Turn the engine off.

Courtesy of KIA MOTORS AMERICA, INC.
Charging voltage and charging system test results will be displayed on the screen.
Shut off engine end disconnect the tester clamps from the battery. Refer to the following table and take the appropriate action as recommended by the Micro 570.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.