lemon-mirror:
Home >> Kia >> 2021 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Case Assembly >> Repair Procedures >> Removal >> Notes

Repair Procedures: Removal: Notes

NOTE: In case of replacing the controller (ECU) and transfer case due to changing characteristics of the frictional materials inside the transfer case, it is necessary to check and enter the calibration data.
  • In case of replacing the transfer case assembly only, perform the clutch learning reset in the using KDS equipment.

    (Refer to 4 Wheel Drive (AWD) System - "REPAIR PROCEDURES ")

  • In case of replacing the ECU only, perform the clutch learning back-up and writing in the new transfer case ECU using KDS equipment.

    (Refer to 4 Wheel Drive (AWD) System - "REPAIR PROCEDURES ")

  • In case of replacing the ECU and transfer case assembly, perform the clutch learning back-up and writing in the new transfer case ECU using KDS equipment.

    (Refer to 4 Wheel Drive (AWD) System - "REPAIR PROCEDURES ")

· About lemon-mirror