lemon-mirror:
Home >> Kia >> 2022 >> Sorento Plug-In Hybrid SX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System (PHEV) >> Position Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Shift transmission to "N" range and turn ignition OFF.
  2. Remove the electronic shift actuator.

    (Refer to Automatic Transaxle Control System - "ELECTRONIC SHIFT ACTUATOR ")

  3. Disconnect the position sensor connector (A).
    G14957300Courtesy of KIA MOTORS AMERICA, INC.
  4. After disconnecting the connector, remove the position sensor (A) by removing the bolts.
    G14957301Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror