Component Inspection
- Connect the KDS on the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Measure the output voltage of the APS 1 and 2.
| Accelerator Position |
Output Voltage (V) [Vref = 5.0 V Standard] |
| APS 1 |
APS2 |
| Idle Stroke |
0.7 - 0.8 |
0.33 - 0.43 |
| Full Stroke |
0.98 - 4.22 |
1.93 - 2.17 |